Gaspardo GENIUS, Инструкции по использованию и сборке / Запасные части, Страница: 17 / 37

USE AND MAINTENANCE
ENGLISH
g
cod. G19502880
43
fig. 25
fig. 26
fig. 27
fig. 29
fig. 30
fig. 28
SETUP OPERATOR SETUP Speed Factor
Speed Factor (Fig. 25):
1. SSF = calibration factor of the working speed sensor (speed sensor factor). The
control unit is set to factor
0.00778 m/pulse relating to the radar speed sensor
fitted on the system (TGSS-MKIII). Warning! DO NOT CHANGE the set value.
2. Auto-Cal = a value calculated through automatic calculation of the speed factor (this test
is described in section 4.4.2).
Press ESC or BACK to go back to the previous menu.
SETUP OPERATOR SETUP Customise
Customise (Fig. 26): is used to select the measurement unit for seed dispensing (Kg/Ha or
seeds/m²) and to determine the percentage up/down value of the metering setpoint. If the
unit “grains/ml” is used, the system requires setting of the T.G.W. value (weight of 1000
seeds) in the “Drill Setup” menu.
Press the arrows
to select the function that needs to be changed.
Press the arrows to select the required value.
Press ENTER to confirm or ESC to go back to the previous menu.
SETUP OPERATOR SETUP Time/Date
Time/Date (Fig. 27): is used to set the hour – minutes – day – month – year.
Press the arrows to select the function that needs to be changed.
Enter the correct values using the numeric keypad (H in Fig. 1).
Press ENTER to confirm or ESC to go back to the previous menu.
SETUP OPERATOR SETUP Helpline
Help on-line (helpline) (Fig. 28): provides a set of useful references, may the need arise.
SETUP OPERATOR SETUP Language
Language (Fig. 29): is used to select the language.
Press the arrows to select the language to be uploaded.
Press ENTER to confirm or ESC to go back to the previous menu.
SETUP OPERATOR SETUP Drill width
Drill width (Fig. 30): is used to set the drill width for the seed dispensing equipment.
Set the correct drill width using the numeric keypad (H in Fig. 1).
Press ENTER
to confirm or ESC to go back to the previous menu.