Gasboy 800938653, Руководство по установке

Страница: 18 / 90

MDE-4813D CFN PLUS Installation Manual · February 2018
8
1
1
-
-
5
5
.
.
A
A
V
V
A
A
I
I
L
L
A
A
B
B
L
L
E
E
C
C
O
O
N
N
F
F
I
I
G
G
U
U
R
R
A
A
T
T
I
I
O
O
N
N
S
S
1-5.1. General
CFN PLUS is available in several configurations, in accordance with its intended use and with the
components installed. All configurations are manufactured in accordance with specific customer
request and receive a Part Number.
The following paragraphs describe the several configurations.
1-5.2. CFN PLUS Vehicle Identification System
Two options are available for vehicle identification with the CFN PLUS:
•
FuelPoint PLUS - WGT (Wireless Gateway Terminal, P/N PA04000001) is Vehicle
identification process performed in a wireless mode. WGT receives DataPass or FuelOPass
signals, decrypts their information and transmits it to the Station automation system (OrCU)
in a secure manner over an RF signal. This setup enables the RF signal to travel through
various routes and bypass possible interferences (such as a big truck/bus). The transmission
signal range is 10 meters. The WGT is designed to be installed in a designated external box
on the station wall or pedestal. The WGT should be connected to the OrCU box using
CAT-5E cable. More than one WGT outdoor unit can be mounted in one station for better
RF area coverage. In this case one WGT box is Master and the other(s) are routers. For
further details, see
MDE-4815 WGT outdoor unit Installation Guide .
•
No vehicle identification unit: The vehicle identification process will be done manually by
the driver with any accepted authorization devices such as cards, tags or manual entry.