BreathSpec®
– Quickstart Manual
5/67
1 General Information
1.1 Information about the Manual
INFORMATION!
This
Quickstart User Manual
is an excerpt of the most important
information for installation and initial setup from the User Manual. It
is an
addition to the User Manual
and does not replace the User
Manual.
This manual describes a safe and adequate handling of the device. Following the
instructions of the indicated safety aspects and instructions as well as the national
and/or local rules and general safety regulations concerning the prevention of
accidents are absolutely imperative.
Before starting the work with the device read the manual completely and thoroughly
particularly the chapter security and respective safety references. Assure that you/the
operator comprehend the terms described.
The manual is part of the device. It must be stored together with and next to the
device at any time.
INFORMATION!
The graphics in this user manual are schematic and may differ from
the actual conditions. The firmware and PC software screenshots in
this user manual may differ from the actual conditions.
1.2 Explanation of Symbols
Important and safety-relevant references in this manual are characterized by
symbols. These indications which are in-line with industrial safety must be respected
and followed at any time.
INFORMATION
This symbol calls information, which are to be considered for
efficient and perfect handling of the equipment.
WARNING
This symbol indicates references, which can lead to damages,
malfunctioning and/or loss of the device.
Содержание BreathSpec
Страница 1: ...Quickstart Manual BreathSpec G A S Gesellschaft f r analytische Sensorsysteme mbH...
Страница 23: ...BreathSpec Quickstart Manual 23 67 Please contact G A S 6 8 weeks in advance to optimize the turn around time...
Страница 37: ...BreathSpec Quickstart Manual 37 67 10 Switch on the BreathSpec...
Страница 64: ...BreathSpec Quickstart Manual 64 67 3 Start measurement with TD start button...