BreathSpec®
– Quickstart Manual
43/67
INFORMATION!
To ensure correct measurements it is absolutely necessary to
connect the supplied exhaust tubes
(Gas out and Sample gas
out).
The exhaust tubes (Gas out and Sample gas out)
must be led
separately into the exhaust system and must not be
connected.
The exhaust system must
not generate any negative pressure
.
6.2 Installing the device
1
Unpack the device.
Remove the foam
spacers.
Remove the accessories
boxes.
Lift the device from the
transport box.
WARNING!
Do not deploy the device in areas exposed to explosive substances or
mixtures!
2
Place it on a robust table
top of minimum footprint
size of 60 cm x 70 cm.
Ensure that there is
enough working space at
the rear side of the
device.
Содержание BreathSpec
Страница 1: ...Quickstart Manual BreathSpec G A S Gesellschaft f r analytische Sensorsysteme mbH...
Страница 23: ...BreathSpec Quickstart Manual 23 67 Please contact G A S 6 8 weeks in advance to optimize the turn around time...
Страница 37: ...BreathSpec Quickstart Manual 37 67 10 Switch on the BreathSpec...
Страница 64: ...BreathSpec Quickstart Manual 64 67 3 Start measurement with TD start button...
