Gas Clip Technologies Multi Gas Clip, Руководство оператора

Страница: 14 / 16

Multi Gas Clip User’s Manual
V1.7 Portable gas detectors you can count on. 14 of 16
Instrument Specifications
Size 4.7 x 2.4 x 1.2 in. (118.6 x 61.6 x 31.7 mm.)
Weight 7.7 oz. (240 g)
Temperature -4 to +122˚F (-20 to +50˚C)
Humidity 5% to 95% RH (non-condensing)
Battery Life
IR 60 days continuous
Pellistor 25 hours (typical)
Charge Time 4-6 hours
Alarms
Visual, Vibrating, Audible (minimum 95dB)
Low, High, STEL, TWA and OL (Over Limit)
LEDs
4 red alarm bar LEDs
Yellow backlight (activated on button press)
Red backlight (activated on alarm condition)
Yellow Maintenance Notification LED
Display Alphanumeric Liquid Crystal Display (LCD)
Logs
25 Bump Tests
25 Events
25 Calibrations
Continuous 1-second data logging (> 2 months typical capacity)
Tests
Full function self-test upon activation
sensors, battery and circuitry continuous
Ingress Protection IP66/67
Warranty Full 2 years
Gases
H
2
S 0 – 100 PPM (0.1 PPM increments)
CO 0 – 500 PPM (1 PPM increments)
Combustible 0 – 100 %LEL (1% LEL increments)
O
2
0 – 30 % vol. (0.1% vol. increments)
Sensor Type
H
2
S, CO, O
2
: Single plug-in electrochemical cell
Combustible: Plug-in Infrared (IR) or catalytic bead
User Options
User Message, Language, Low Alarm, High Alarm, STEL Alarm, TWA
Alarm, TWA Method, TWA Interval, STEL Interval, SAFE, Maintenance
Notification, Self-test Lock, Dock Lock, Sensor enable, Calibration
Interval, Bump Interval, Calibration Gas,
Approvals
CSA: Class 1, Division 1, Group A, B, C, and D
Class 1, Zone 0, AEx ia IIC T4 Ga
ATEX (PENDING) : CE 0359 II 1 G Ex ia IIC T4 Ga
EN 60079-0, EN 60079-11, EN 60079-26
EN 50270
IECEx: Ex ia IIC T4 Ga
STANDARDS: C22.2 No.’s. 0, 152, 157, 60079-0, 60079-11
UL-913
UL 60079-0, 60079-11
ANSI/ISA S12.13.01
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications.