Gas Clip Technologies Multi Gas Clip, Руководство оператора

Страница: 4 / 16

Multi Gas Clip User’s Manual
V1.7 Portable gas detectors you can count on. 4 of 16
Basic Operation
Button Usage
Operation of the detector is driven by a single button located on the front of the instrument:
 Turn On/Off
 Menu Navigation (Status and Options)
 Latched Alarm acknowledgement
 Backlight activation
 Calibration
Turning On the Detector
To activate the detector, press and hold down the button. If the battery is too low for
activation the detector will display “LOW BAT” and then turn off again. Once activated, the
unit will begin to display gas readings immediately. Each sensor will show a chasing “O” for
the sensor reading while it is stabilizing and being self-tested:
“Chasing O”
Fully operational
Once all sensors have completed the warm up sequence the detector is ready to detect all
gases.
Turning Off the Detector
Press and hold the button to start the shutdown sequence. The LCD will display OFF along
with a countdown. Release the button after the countdown and the unit will turn off.