Multi Gas Clip User’s Manual
V1.7
Portable gas detectors you can count on.
9 of 16
Instrument Options/Menus
To access the user menus press the button two separate times in quick succession (“double
tap”). The detector will display:
1.
Current date/time
2.
User-programmed text message
3.
Status menu prompt
4.
Options menu prompt
If the status menu is accessed by pressing the button during the prompt, the detector will
display:
1.
Last calibration date
2.
When calibration is due
3.
Last bump test date
4.
When bump test is due
5.
Current Time Weighted Average (TWA) readings
6.
Current Short Term Exposure Limit (STEL) readings
7.
Peak sensor readings
8.
Prompt to clear the TWA, STEL and Peak sensor readings (if the button is pressed)
If the Options menu is accessed by pressing the button during the prompt, the detector will
display:
1.
The detector’s firmware revision
2.
The TWA alarm limits
3.
The STEL alarm limits
4.
The LOW alarm limits
5.
The HIGH alarm limits
Main Menu:
Date/Time: Set every time the instrument is communicated via IR Link or Docking Station.
User Message: If the message is empty, the detector will skip ahead. If the startup message
does not fit on one screen, it will scroll right-to-left twice.
Sub-Menu Prompts: Pressing the button during a sub-menu prompt will cause the detector
to show more information. If the button is not pressed, the detector will immediately return
to normal operation.
Status Menu:
Calibration Information: The date of the last calibration along with the number of days
remaining until the next calibration is due will be displayed. If calibration is due, the
detector must be calibrated (refer to the Calibration section)
Bump Test Information: The date of the last bump test along with the number of days
remaining until the bump test is due will be displayed. If a bump test is due, the detector
must be bump tested (refer to the Bump Testing section)
Peak Levels: The detector will display the current TWA and STEL readings, followed by the
peak concentrations recorded for each sensor. Each time the unit is turned off these values
will be reset.
Содержание Multi Gas Clip
Страница 1: ...Operator s Manual...
