
iQue
™
3600
QueGPS Options
GPS Applications
5
To use QueGPS Options:
1. Tap the
QueGPS
application tab or the
Menu
icon to display the
Options
Menu.
2. Observe the list of options:
•
Tap
Preferences
to display the GPS preference options.
• When in 2D mode, tap
New Elevation
to reset the elevation.
• Tap
New Location
when initializing the GPS Receiver if you
have moved over 600 miles from your last use location or if you
have not powered up the unit in over thirty days.
To use QueGPS Preferences:
1. Tap the
Preferences
option to display the GPS Preferences Menu.
2. Observe the list of options with check boxes:
•
Tap
WAAS Enabled
to enable the Wide Area Augmentation
System operating mode. (See Additional Information about WAAS
on page 53.)
•
Tap
Battery Saver
to change the rate at which the GPS receiver
updates your position data to conserve battery power. The GPS
receiver slows the frequency at which it calculates your location
and therefore requires less battery power with the result being a
slight loss in position accuracy. The GPS is turned completely Off
when the antenna is fully closed.
You cannot operate in the WAAS and Battery Saver modes
at the same time. If you attempt to check both boxes, a message
will display and the last option checked will remain on after you
tap the message “OK”
Set New Elevation
Select New
Location for
Initialization
Preference Settings
QueGPS Options
QueGPS Preferences Menu
QueApplicationsGuideFinal.indd 15
6/23/2003, 3:17:58 PM