16-19
190-01007-03 Rev. B
Garmin GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
Touch OK to Enable
Crossfill With Dual Units
Figure 16-19 Confirming Crossfill Selection
16.4.1.5 CDI Scale Selection
The CDI source and ILS CDI Capture type may be selected manually or
automatically. The selected CDI Scale will be reflected in the annunciation bar at
the bottom of the display.
Touch To Select CDI Scale
Touch To Select ILS CDI
Capture Type
Figure 16-20 CDI Selection
1. While viewing the System Setup page, touch the
CDI Scale
key
to allow automatic selection or to choose a CDI Scale manually.
Touch To Select 1 NM CDI
Scaling
Touch To Select Automatic
CDI Scaling
Figure 16-21 CDI Scale Selection
2. Touch the
ILS CDI Capture
key to select automatic or manual.
This feature enables the unit to automatically switch from GPS
to VLOC on an ILS approach. See
Procedures-ILS Approaches for
more detail on ILS approaches.
Содержание GTN 750
Страница 417: ......