10-12
Garmin GTN 725/750 Pilot’s Guide
190-01007-03 Rev. B
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
10.2.2 Displaying and Operating Traffic (TAS Systems)
The unit must be in Operating mode for traffic to be displayed. The ability to
switch from Standby to Operating mode on the ground is especially useful for
scanning the airspace around the airport before takeoff.
Heading
Annunciation
Range Rings
Ownship
Position
Non-Threat
Traffic
Traffic
Proximity
Advisory
Altitude Filter
Traffic Status Key
(Operate/Standby)
Range Ring Distance
Figure 10-6 Traffic Page
10.2.2.1 Switching from Standby Mode to Operating Mode
1. From the Home page, touch the
Traffic
key.
2. Confirm TAS is in Operating Mode.
3. Touch the
Traffic Status
key to toggle between Operate and
Standby mode.
4. Touch the
Altitude Filter
key to change the altitude
volume.
NOTE:
Not all TAS systems can be set to “Standby” mode while in the
air.
The Traffic Page shows surrounding TAS traffic data in relation to the aircraft’s
current position and altitude without basemap clutter. Aircraft orientation is
always heading up unless no valid heading is received. The Traffic Status is
annunciated in the lower left corner and the Altitude Filter is annunciated in the
lower right corner.
Содержание GTN 750
Страница 417: ......