16-18
Garmin GTN 725/750 Pilot’s Guide
190-01007-03 Rev. B
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
16.4.1.4 Crossfill
Dual units may be interfaced to crossfill information between the two units.
This option will not be available unless dual units are configured.
When Crossfill is turned on with one GTN, it is automatically turned on in the
other GTN. Some items are always crossfilled regardless of the crossfill setting;
others are dependent on the crossfill setting.
NOTE
: Upon crossfill being activated, the GTNs may take up to 10 seconds
to crossfill the flight plans. The pilot must verify the flight plan in each unit
prior to use.
This data is always crossfilled:
• User waypoints
• Flight plan catalog
• Alerts (traffic popup acknowledgement, missed approach waypoint
popup acknowledgement, altitude leg popup acknowledgement)
• External sensors (transponder status and commands, synchro heading)
• System setup:
- Favorite NAV frequencies
- Date/Time convention
- Nearest airport criteria
- Units (Nav angle, Distance/Speed, etc.)
- Favorite COM frequencies
- Ownship icon
- CDI Scale setting
- ILS CDI Capture setting
This data is crossfilled only if crossfill is turned on by the pilot:
• Active navigation (flight plan)
1. While viewing the System Setup page, touch the
Crossfill
key
to toggle between Enabled and Disabled Crossfill.
or
2. When Crossfill is about to be enabled, you will be prompted
to note that data will be overwritten in the other unit. Touch
OK
to enable Crossfill or touch
Cancel
to return to the System
Setup page without enabling Crossfill.
Содержание GTN 750
Страница 417: ......