Garmin GPSMAP 8000 Glass Helm Series, Инструкция по эксплуатации

Страница: 12 / 48

2
Select AIS Vessel .
Deactivating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel > Deactivate .
Viewing a List of AIS and MARPA Threats
1 From a chart or a 3D chart view, select Menu > Other
Vessels > AIS & MARPA List > Show .
2
Select the type of threats to include in the list.
Setting the Safe-Zone Collision Alarm
Before you can set a collision alarm, you must have a
compatible chartplotter connected to an AIS device or radar.
The safe-zone collision alarm is used only with AIS and
MARPA. MARPA functionality works with radar. The safe zone
is used for collision avoidance and can be customized.
1
Select Settings > Alarms > AIS > Collision Alarm > On .
A message banner appears and an alarm sounds when a
MARPA-tagged object or an AIS-activated vessel enters the
safe-zone area around your boat. The object is also labeled
as dangerous on the screen. When the alarm is off, the
message banner and audible alarm are disabled, but the
object is still labeled as dangerous on the screen.
2
Select Range .
3
Select a distance for the safe-zone radius around your
vessel.
4
Select Time To .
5 Select a time at which the alarm will sound if a target is
determined to intersect the safe zone.
For example, to be notified of a pending intersection 10
minutes before it will likely occur, set Time To to 10, and the
alarm will sound 10 minutes before the vessel intersects the
safe zone.
AIS Distress Signals
Self-contained AIS distress signal devices transmit emergency
position reports when activated. The chartplotter can receive
signals from Search and Rescue Transmitters (SART),
Emergency Position Indicating Radio Beacons (EPIRB), and
other man overboard signals. Distress signal transmissions are
different than standard AIS transmissions, so they appear
differently on the chartplotter. Instead of tracking a distress
signal transmission for collision avoidance, you track a distress
signal transmission to locate and assist a vessel or person.
Navigating to a Distress Signal Transmission
When you receive a distress signal transmission, a distress
signal alarm appears.
Select Review > Go To to begin navigation to the
transmission.
AIS Distress Signal Device Targeting Symbols
Symbol Description
AIS distress signal device transmission. Select to see more
information about the transmission and begin navigation.
Transmission lost.
Transmission test. Appears when a vessel initiates a test of
their distress signal device, and does not represent a true
emergency.
Transmission test lost.
Enabling AIS Transmission Test Alerts
To avoid a large number of test alerts and symbols in crowded
areas such as marinas, you can select to receive or ignore AIS
test messages. To test an AIS emergency device, you must
enable the chartplotter to receive test alerts.
1
Select Settings > Alarms > AIS .
2
Select an option:
• To receive or ignore Emergency Position Indicating Radio
Beacon (EPRIB) test signals, select AIS-EPIRB Test .
• To receive or ignore Man Overboard (MOB) test signals,
select AIS-MOB Test .
• To receive or ignore Search and Rescue Transponder
(SART) test signals, select AIS-SART Test .
Turning Off AIS Reception
AIS signal reception is turned on by default.
Select Settings > Other Vessels > AIS > Off .
All AIS functionality on all charts and 3D chart views is
disabled. This includes AIS vessel targeting and tracking,
collision alarms that result from AIS vessel targeting and
tracking, and the display of information about AIS vessels.
Chart and 3D Chart View Settings
NOTE: Not all settings apply to all charts and 3D chart views.
Some options require premium maps or connected accessories,
such as radar.
These settings apply to the charts and 3D chart views, except
the radar overlay and Fish Eye 3D ( Fish Eye 3D Settings ).
From a chart or a 3D chart view, select Menu > Chart Menu .
Waypoints & Tracks : See Waypoints and Tracks Settings on
the Charts and Chart Views .
Other Vessels : See Other Vessels Settings on the Charts and
Chart Views .
Surface Radar : Shows surface radar details on the Perspective
3D or Mariner's Eye 3D chart views.
Weather Radar : Shows weather radar imaging on the
Perspective 3D or Mariner's Eye 3D chart views.
Navaids : Shows navigational aids on the Fishing chart.
Laylines : Adjusts the laylines, when in sailing mode ( Laylines
Settings ).
Chart Setup : See Navigation and Fishing Chart Setup .
Chart Appearance : See Chart Appearance Settings . This might
appear in the Chart Setup menu.
Navigation and Fishing Chart Setup
NOTE: Not all settings apply to all charts and 3D chart views.
Some settings require external accessories or applicable
premium charts.
From the Navigation chart or Fishing chart, select
Menu >
Chart Menu > Chart Setup .
Satellite Photos : Shows high-resolution satellite images on the
land or on both land and sea portions of the Navigation chart,
when certain premium maps are used ( Showing Satellite
Imagery on the Navigation Chart ).
Water Overlay : Enables relief shading, which shows the
gradient of the bottom with shading, or sonar imagery, which
helps identify the density of the of the bottom. This feature is
available only with some premium maps.
Tides & Currents : Shows current station indicators and tide
station indicators on the chart ( Showing and Configuring
Tides and Currents ) and enables the tides and current slider,
which sets the time for which tides and currents are reported
on the map.
Roses : Shows a compass rose around your boat, indicating
compass direction oriented to the heading of the boat. A true
wind direction or apparent wind direction indicator appears if
the chartplotter is connected to a compatible marine wind
sensor. When in sailing mode, true and apparent wind are
shown on the wind rose.
Lake Level : Sets the present water level of the lake. This
feature is available only with some premium maps.
6 Charts and 3D Chart Views