Garmin GNS 530W, Руководство и справочник пилота

Страница: 83 / 230

4 - FLIGHT PLANS
73
Select Approach
Select Approach? allows you to select a published
instrument approach for the destination airport, or
replace the current approach with a new selection.
(In many cases, you’ll find it more convenient
to select approaches using the
PROC key — as
described in Section 5 - Procedures.)
Published instrument approaches can be
selected and used from the Active Flight
Plan Options, or by pressing the PROC key.
The “Select Approach?” option appears in
both places.
To select an approach for a direct-to or flight plan
destination airport:
1. From the Active Flight Plan Page, press
MENU
to display the Active Flight Plan Page
Options.
2. Highlight the “Select Approach?” option and
press ENT .
3. A window appears listing the available
approaches for your destination airport. Turn
the
small right
knob to highlight the desired
approach and press ENT .
4. A second window appears listing available
transitions for the approach. Turn the small
right
knob to highlight the desired transi-
tion waypoint and press ENT . (The “Vectors”
option assumes you will receive vectors to the
final course segment of the approach and will
provide navigation guidance to intercept this
final course.)
5. Turn the
large right
knob to highlight “Load?”
or “Activate?” and press ENT. “Load?” adds
the approach to the flight plan without imme-
diately using the approach for navigation guid-
ance. This allows you to continue navigating
the original flight plan until cleared for the
approach, but keeps the approach available
for quick activation when needed. “Activate?”
adds the approach to the flight plan and begins
navigating the approach course.
6. For precision approaches, and non-precision
approaches not approved for GPS, a reminder
window appears indicating that GPS guidance
on such approaches is strictly for monitoring
only. To confirm this reminder, highlight “Yes?”
and press
ENT
.
Select Arrival
Select Arrival? allows you to select a published
standard terminal arrival route (STAR) for the destina-
tion airport, or replace the current arrival with a new
selection. (See
Section 5 - Procedures
for information
on selecting arrivals using the PROC key.) Arrivals are
not available for all airports, in which case the arrival
windows will show “NONE.”
To select an arrival for a direct-to or flight plan
destination airport:
1. From the Active Flight Plan Page, press
MENU
to display the Active Flight Plan Page
Options.
2. Highlight the “Select Arrival?” option and press
ENT .
Active Flight Plan Options