Garmin GNS 530W, Руководство и справочник пилота

Страница: 185 / 230

9 - AUX PAGES
175
Setup 1 Page
Setup 1 Page
The Setup 1 Page provides access to airspace
alarms, CDI scale adjustments, an arrival alarm, units
of measure settings, position formats, map datums,
settings for local or UTC time display, display adjust-
ments, nearest airport search parameters, data field
configurations and COM transceiver channel spacing.
When an item is selected, the corresponding page
appears providing access to the various unit settings.
To select, highlight
with cursor and
press ENT .
Third Page
in AUX Group
To select an item from the Setup Page:
1. Press the
small right
knob momentarily, to
activate the flashing cursor.
From the Setup Page, highlight the desired
item and press ENT...
2. Turn the large right knob to select the desired
item, and press
ENT
.
...to display the corresponding page (e.g.
Units / Position Page).
The following items are available:
CDI / Alarms — allows you to define the scale for
the 500W-series unit on-screen course deviation
indicator. The scale values represent full scale
deflection for the CDI to either side. The default
setting is “Auto”. At this setting, the CDI scale is
set to 2.0 NM during the “en route” phase of flight.
Within 31 NM of your destination airport, the CDI
scale gradually ramps down to 1.0 NM (termi-
nal area). Likewise, when leaving your departure
airport the CDI scale is set to 1.0 NM and gradu-
ally ramps up to 2 NM beyond 30 NM (from the
departure airport). During approach operations
the CDI scale gradually transitions down to an
angular CDI scale. At 2.0 NM of the final approach
fix (FAF), CDI scaling is tightened from 1.0 to the
angular full scale deflection (typically the angular
full-scale deflection is 2.0°, but will be as defined
for the approach).