Garmin GNS 530W, Руководство и справочник пилота

Страница: 135 / 230

6 - WPT PAGES
125
Airport Approach Options
To load and activate an approach from the Airport
Approach Page, follow the steps above, but select
“Load and Activate?” in step #3.
Select “Load and Activate?” to immediately
begin using the approach waypoints for
navigation guidance.
Select Approach Chnl? allows you to select the
channel number for a WAAS approach for the
current destination. The channel number for the
WAAS approach is available from an approved
approach chart.
If duplicate numbers are available for a channel,
a list will be available where you may select the
desired approach.
After selecting “Select Approach Chnl?”,
choose the WAAS channel number for the
current destination.
After selecting the Approach Channel, the WAAS
approach ID will be shown in the top left corner of
the map display.
To select an approach channel from the Airport
Approach Page:
1. Press
MENU
to display the Airport Approach
Page Options.
2. Turn the
small
or
large right
knob to high-
light “Select Approach Chnl? and then press
ENT .
3. Turn the small right knob to change values
and the
large right
knob to move the cursor.
After selecting the WAAS approach channel,
press
ENT .
4. Select the desired transition and press ENT .
To select the next FPL airport from the Airport
Approach Page:
As described earlier in this section.
To select the Destination airport from the Airport
Approach Page:
As described earlier in this section.