Garmin GNS 430, Руководство и справочник пилота

Страница: 68 / 266

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P
5-2
SECTION 5
FLIGHT PLANS
4) A blank Flight Plan Page appears for the first
empty storage location (Figure 5-4). Use
the small and large
right knobs to enter the
identifier of the departure waypoint and press
the
ENT Key.
Figure 5-4 Flight Plan Page
5) Repeat step 4 above to enter the identifier for
each additional flight plan waypoint.
6) Once all waypoints have been entered, press
the small right knob to return to the Flight
Plan Catalog Page.
Flight Plan Editing
To add a waypoint to an existing flight
plan:
1) Press the FPL Key and turn the small right
knob to display the Flight Plan Catalog Page.
2) Press the small
right
knob to activate the
cursor.
3) Turn the large right knob to highlight the
desired flight plan and press the ENT Key.
4) Turn the large right knob to select the point to
add the new waypoint. If an existing waypoint
is highlighted, the new waypoint is placed
directly in front of this waypoint (Figure 5-5).
Figure 5-5 Flight Plan Page
5) Use the small and large
right
knobs to enter
the identifier of the new waypoint and press
the
ENT
Key (Figure 5-6).
Figure 5-6 Waypoint Identifier Field Selected
6) Once all changes have been made, press the
small
right
knob to return to the Flight Plan
Catalog Page (Figure 5-7).
Figure 5-7 Edited Flight Plan Page