manualshive.com logo in svg

Garmin GNS 430, Руководство и справочник пилота

Garmin GNS 430 - высокотехнологичное навигационное устройство с детальной спецификацией и мануалом. Бесплатно скачайте инструкцию на manualshive.com. Легкость использования и точные карты делают его отличным выбором для авиации.

Поделиться
Скачать
background image

GNS 430(A) Pilot’s Guide and Reference

190-00140-00  Rev. P

SECTION 14 – MESSAGES, 

ABBREVIATIONS, & NAV TERMS

14-5

Heading input failure

The heading selection on the external HSI’s (or CDI’s) OBS course selector cannot be read 
properly.  A Garmin dealer may need to check the installation.

Inside airspace

A GPS-calculated position lies within the boundaries of a special use airspace.  This message 
is automatically disabled within 30 nm of an arrival airport, when an approach is loaded.

Invalid closest pt of 
FPL

A closest point cannot be created from the waypoint entered on the ‘Closest point of flight 
plan’ window.  This occurs when the selected waypoint is beyond the limits of all legs in the 
flight plan, too far away, or when a unique waypoint name for the closest point cannot be 
created.

Invalid FPL 
modification

An attempt was made to modify the final course segment (FAF to MAP) of an instrument 
approach.  The GNS 430 does not allow the modifications.

Invalid waypoint ident

An attempt was made to create a user waypoint with an invalid name.  The GNS 430 does 
not allow spaces between characters in the waypoint name.

MAIN processor 
requires service

The GNS 430 has detected a failure in the main system processor.  The GNS 430 is not usable 
and should be taken to a Garmin dealer for service.

Memory battery low

The internal battery that sustains user memory is low and should be replaced by a Garmin 
dealer as soon as possible.  Failure to do so may result in loss of stored data, including flight 
plans, user waypoints, unit settings, and satellite data.

Near airspace -- less 
than 2 nm

The GPS-calculated position is within 2 nm of a special use airspace boundary, but the 
aircraft is  not projected to enter the airspace.  This message is automatically disabled within 
30 nm of an arrival airport, when an approach is loaded.

Need altitude - display 
position page

The GPS receiver needs altitude input in order to start and/or continue 2D navigation.  Select 
the Position Page and verify the altitude reading.  If the altitude is in error by more than 
500 feet, enter the current altitude as accurately as possible.  An inaccurate altitude directly 
translate into inaccurate position information.

No altitude input is 
being received

No altitude data is being received from RS-232 (Serializer: Icarus, Rosetta or Shadin) or grey 
code inputs.  If the problem persists, contact a Garmin dealer and check the installation 
and installation settings.  When this message occurs, no pilot action is required if enough 
satellites are available for a 3D position fix (provided no RAIM warnings are present).  
However, if only a 2D position fix is possible, the pilot should maintain the GPS altitude 
within 1,000 feet of pressure altitude by entering the altitude on the Position Page.

No basemap data 
available

The GNS 430 has detected a failure in the built-in basemap (land data) memory.  Land data 
does not appear on the Map Page.  Other unit functions continue to work normally; however, 
the GNS 430 should be taken to a Garmin dealer for service at the earliest convenience.

Not receiving input 
data on 429 Channel 1

No data has been received on the ARINC 429 channel 1 connection for a period exceeding 
five seconds.  If the problem persists, the installation should be checked by a Garmin dealer.

Содержание GNS 430











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GNS 430

Garmin G1000:Piper Pilot'S Manual preview
G1000:Piper
Бренд: Garmin Страницы: 450
Avidyne IFD410 FMS/GPS Pilot'S Manual preview
IFD410 FMS/GPS
Бренд: Avidyne Страницы: 380
Bartscher Sushi Bar 5x 1/2 GN Instruction Manual preview
Sushi Bar 5x 1/2 GN
Бренд: Bartscher Страницы: 81
Skymsen FWD1-33 Instruction Manual preview
FWD1-33
Бренд: Skymsen Страницы: 8
Diamond Digital DV42P2 User Manual preview
DV42P2
Бренд: Diamond Digital Страницы: 24
Cretors Nacho Alto Manual preview
Nacho Alto
Бренд: Cretors Страницы: 8
Costan WHALE 1000 G User Instructions preview
WHALE 1000 G
Бренд: Costan Страницы: 47

Бренды по названию

Популярные бренды

Загрузить еще бренды