Garmin GNS 430 Скачать руководство пользователя

Страница: 176 / 266

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

10-18

SECTION 10

AUX PAGES

3) The flashing cursor moves to the arrival date

field. Use the small and large

right

knobs to

enter the date for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when finished.

4) The flashing cursor moves to the arrival time

field. Use the small and large

right

knobs to

enter the time for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when finished.

5) The flashing cursor moves to ‘Compute

RAIM?’ (Figure 10-44). Press the

ENT

Key to

begin RAIM prediction. Once calculations are
complete, the GNS 430 displays one of the
following in the RAIM status field:

Figure 10-44 ‘Compute RAIM?’ Highlighted

• RAIM Not Available - Satellite coverage is

predicted to NOT be sufficient for reliable

operation during non-precision approaches

• RAIM Available - Satellite coverage is predicted to

be sufficient for reliable operation during all

flight

phases, including non-precision approaches

NOTE: RAIM computations predict satellite
coverage within

15 minutes of the specified

arrival date and time. Refer to Section 10.4 for
specific information regarding RAIM protection
limits, also refer to Section 13 for FDE (Fault
Detection and Exclusion) information.

Utility Page: Sunrise/Sunset

To calculate sunrise and sunset times at any
waypoint or the present position:

1) Select ‘Sunrise/Sunset’ from the Utility Page,

using the steps described at the beginning of
this section (Figure 10-45).

Figure 10-45 Sunrise Sunset Highlighted

2) The flashing cursor highlights the waypoint

field. Use the small and large

right

knobs to

enter the identifier of the waypoint at which
the pilot wants to determine sunrise and sunset
times. Press the

ENT

Key when finished. To

determine sunrise/sunset times for the present
position, press the

CLR

Key, followed by the

ENT

Key.

3) The flashing cursor moves to the date field

(Figure 10-46). Use the small and large

right

knobs to enter the date for which the pilot
wants to determine sunrise and sunset times.

Figure 10-46 Date Field Highlighted

Содержание GNS 430











































































































































































































































































Результаты поиска

Содержание GNS 430

Отзывы:

Похожие инструкции для GNS 430

Бренды по названию

Популярные бренды

Garmin GNS 430, Руководство и справочник пилота

Результаты поиска

Содержание GNS 430

Отзывы:

Похожие инструкции для GNS 430

Бренды по названию

Популярные бренды