Garmin GNS 430 Скачать руководство пользователя

Страница: 45 / 266

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

SECTION 3

NAV PAGES

3-11

5) Press the

ENT

Key to accept the selected option

(Figure 3-19).

Figure 3-19 Map Setup Page

The

automatic zoom feature automatically adjusts

the

map range from 2000 nm through each lower range,

stopping at 1.0 nm when approaching the destination
waypoint.

To enable/disable automatic zoom:

1) From the Map Page Menu, turn the large

right

knob to highlight ‘Setup Map?’ and press the

ENT

Key.

2) Turn the small

right

knob to select ‘Map’ and

press the

ENT

Key.

3) Turn the large

right

knob to highlight the ‘Auto

Zoom’ field.

4) Turn the small

right

knob to select ‘On’ or

‘Off’.

5) Press the

ENT

Key to accept the selected

option.

To enable/disable the wind vector, all back-
ground land data, or all Jeppesen aviation
data:

1) From the Map Page Menu, turn the large

right

knob to highlight ‘Setup Map?’ and press the

ENT

Key.

2) Turn the small

right

knob to select ‘Map’ and

press the

ENT

Key.

3) Turn the large

right

knob to highlight the

appropriate field.

4) Turn the small

right

knob to select ‘On’ or

‘Off’.

5) Press the

ENT

Key to accept the selected

option.

To display airports, NAVAIDs, active flight
plan waypoints, user-created waypoints,
state/provincial boundaries, rivers/lakes,
and cities:

1) From the Map Page Menu, turn the large

right

knob to highlight ‘Setup Map?’ and press the

ENT

Key.

2) Turn the small

right

knob to select the

appropriate group name (per the table on the
preceding page) and press the

ENT

Key.

3) Turn the large

right

knob to highlight the zoom

field for the desired feature.

4) Turn the small

right

knob to select the

maximum range at which the feature should
appear on screen (or select ‘Off’ to never
display the selected feature).

5) Press the

ENT

Key to accept the selected

option.

6) Turn the large

right

knob to highlight the text

field for the desired feature.

7) Turn the small

right

knob to select the desired

text size, or select ‘None’ to disable text
descriptions.

8) Press the

ENT

Key to accept the selected

option.

Содержание GNS 430











































































































































































































































































Результаты поиска

Содержание GNS 430

Отзывы:

Похожие инструкции для GNS 430

Бренды по названию

Популярные бренды

Garmin GNS 430, Руководство и справочник пилота

Результаты поиска

Содержание GNS 430

Отзывы:

Похожие инструкции для GNS 430

Бренды по названию

Популярные бренды