manualshive.com logo in svg

Garmin Edge 510, Быстрое руководство, Страница: 50 / 60

Поделиться
Скачать
Garmin Edge 510 Скачать руководство пользователя страница 50

50

installing the Pedal Pod and Pedal

this procedure is for the vector system. for the vector s system, 
see installing the left Pedal and Pedal Pod.

1.

  install the left pedal first. 

2.

  apply a thin layer of grease on the pedal spindle 

 1

 and the 

pedal pod 

 2

 where it contacts the pedal spindle. 

3.

  on the pedal spindle, stack the pedal pod and any required 

washers 

 3

. 

4.

  insert the spindle into the crank arm 

 5

. 

5.

  Hand tighten the spindle. 

6.

  rotate the crank arm to check for clearance. the pedal pod 

should not interfere with any part of the bike. 

7.

  use the pedal wrench to tighten the spindle. 

 

8.

  firmly plug the cable into the spindle. 

9.

  rotate the crank arm to check for clearance. 

10.

 repeat steps 2 – 9 to install the right pedal. 

NOTE

The left and right pedal pods are the same. 

NOTE

The left pedal spindle has a left-handed (reverse) thread. 

NOTE

Garmin recommends torque of 25 to 30 lbf-ft. (34 to 40 N-m). 

TIP

You must carefully bend the cable

 

 4

 

out of the way. 

TIP

Power and cadence 
calculations are not 
impacted by the orientation 
of the pedal pod. Garmin

®

 

recommends placement 
of the pedal pod on the 
leading edge of the crank. 
When the crank is in the 
forward position, the pedal 
pod should be pointing 
downward.

NOTE

If the pedal pod cable rubs the chain, you can add one or two 
washers between the pedal pod and the crank arm to increase 
clearance. 

cHaPter 7: vector

150217_Garmin_Quickguide_BIKE_GPS_Devices_RZ.indd   50

17.02.15   16:55

Содержание Edge 510





























































Отзывы:

Нет отзывов