37
cHaPter 5: Profiles
auto lap
the auto lap feature automatically marks a lap at every kilometer, and you can mark laps manually for
comparing performance over longer runs for a one kilometer segment.
1.
on
activity profiles
, select
auto features
(edge 1000
only), then select the profile
required.
4.
select
lap at
.
2.
scroll down to select
auto
lap.
5.
select an option:
– select
lap press only
to
trigger the lap counter each
time you select
and each
time you pass any of those
locations again.
– select
start and lap
to trig-
ger the lap counter at the GPs
location where you select
and at any location during the
ride where you select
.
– select
mark and lap
to
trigger the lap counter at a
specific GPs location marked
before the ride and at any
location during the ride where
you select
.
3.
select
By position
.
1.
4.
2.
5.
3.
150217_Garmin_Quickguide_BIKE_GPS_Devices_RZ.indd 37
17.02.15 16:55
