Garmin ECHOMAP UHD2 6 SV, Руководство пользователя

Страница: 37 / 152

Chart Layers
You can turn on and off chart layers and customize features of the charts. Each setting is specific to the chart
or chart view being used.
NOTE: Not all settings apply to all charts and chartplotter models. Some options require premium maps or
connected accessories.
NOTE: The menus may contain some settings that are not supported by your installed charts or your present
location. If you make changes to those settings, the changes will not impact the chart view.
From a chart, select > Layers.
Chart: Shows and hides chart-related items (
Chart Layer Settings, page 27 ).
My Vessel: Shows and hides items relating to the boat ( My Vessel Layer Settings, page 28 ).
Manage User Data: Shows and hides user data, such as waypoints, boundaries, and tracks, and opens user data
lists ( User Data Layer Settings, page 28 ).
Other Vessels: Adjusts how other vessels are shown ( Other Vessels Layer Settings, page 29 ).
Water: Shows and hides depth items ( Water Layer Settings, page 29 ).
Quickdraw Contours: Shows and hides Garmin Quickdraw Contours data ( Garmin Quickdraw Contours Settings,
page 35 ).
Chart Layer Settings
From a chart, select > Layers > Chart.
Satellite Photos: Shows high-resolution satellite images on the land or on both land and sea portions of the
Navigation chart, when certain premium maps are used ( Showing Satellite Imagery on the Navigation Chart,
page 21 ).
NOTE: This setting must be enabled to view Standard Mapping charts.
Tides & Currents: Shows current station indicators and tide station indicators on the chart ( Showing Tides and
Current Indicators, page 20 ) and enables the tides and current slider, which sets the time for which tides and
currents are reported on the map.
Land POIs: Shows points of interest on land.
Navaid: Shows navigational aids, such as ATONs and flashing lights, on the chart. Allows you to select NOAA or
IALA navaid type.
Service Points: Shows locations for marine services.
Depth: Adjusts the items on the depth layer (
Depth Layer Settings, page 27 ).
Restricted Areas: Shows information about restricted areas on the chart.
Photo Points: Shows camera icons for aerial photos (
Viewing Aerial Photos of Landmarks, page 21 ).
Depth Layer Settings
From a chart, select > Layers > Chart > Depth.
Depth Shading: Specifies an upper and lower depth to shade between.
Shallow Shading: Sets the shades from the shoreline to the specified depth.
Spot Depths: Turns on spot soundings and sets a dangerous depth. Spot depths that are equal to or more
shallow than the dangerous depth are indicated by red text.
Fishing Contours: Sets the zoom level for a detailed view of bottom contours and depth soundings and
simplifies map presentation for optimal use while fishing.
Charts and 3D Chart Views 27