Sounds and Display Settings
Select Settings > System > Sounds and Display.
Beeper: Turns on and off the tone that sounds for alarms and selections.
Audio Setup: Sets up the audio output.
Backlight: Sets the backlight brightness. You can select the Auto option to adjust the backlight brightness
automatically based on the ambient light.
Backlight Sync: Synchronizes the backlight brightness of other chartplotters in the station.
Color Mode: Sets the device to display day or night colors. You can select the Auto option to allow the device to
set day or night colors automatically based on the time of day.
Startup Image: Sets the image that appears when you turn on the device.
Startup Layout: Sets the layout that appears when you turn on the device.
Audio Settings
You can adjust audible alarms, alerts, and warnings that are sounded over connected audio devices, such as a
Fusion stereo. An audio device can be connected using HDMI
®
or the NMEA 0183 Audio Cable accessory.
Select Settings > System > Sounds and Display > Audio Setup.
Audio Output: Turns on the audio output for audio alerts.
Audio Alerts: Sets which system alarms and alerts are played over the compatible audio output. An alarm
indicates a situation could be hazardous to passengers and requires immediate action. A warning indicates
the situation could be hazardous to equipment on the vessel or the vessel itself and requires action very
soon. All other messages and information are classified as alerts.
Audio Alert Language: Sets the spoken language for alerts.
Audio Alert Device: Sets the device to control when alerts are played.
Audio Alert Source: Switches the audio device to the selected source when an alert is played.
Alert Volume: Controls the volume of the alerts.
Satellite Positioning (GPS) Settings
NOTE: Not all options are available on all models.
Select Settings > System > Satellite Positioning.
Skyview: Shows the relative position of GPS satellites in the sky.
GLONASS: Turns on or off GLONASS data (Russia satellite system). When the system is used in situations with
poor sky visibility, GLONASS data can be used in combination with GPS to provide more accurate position
information.
WAAS/EGNOS: Turns on or off WAAS data (in North America) or EGNOS data (in Europe), which can provide
more-accurate GPS position information. When using WAAS or EGNOS data, the device may take longer to
acquire satellites.
Galileo: Turns on or off Galileo data (European Union satellite system). When the system is used in situations
with poor sky visibility, Galileo data can be used in combination with GPS to provide more accurate position
information.
Speed Filter: Averages the speed of your vessel over a short period of time for smoother speed values.
Source: Allows you to select the preferred source for GPS data.
120
Device Configuration
Содержание ECHOMAP UHD2 6 SV
Страница 1: ...ECHOMAP UHD26 7 9SV Owner sManual...
Страница 10: ......
Страница 151: ......
Страница 152: ...support garmin com GUID 900F784C 8371 433B B263 67611C27A94C v1 January 2023...
