![Garmin Cessna Caravan G1000 Скачать руководство пользователя страница 238](http://html1.mh-extra.com/html/garmin/cessna-caravan-g1000/cessna-caravan-g1000_pilots-manual_3596290238.webp)
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
218
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Creating a user-defined hold at a direct-to waypoint:
1)
Press a
¯
Key and set up the direct-to waypoint as desired, but select HOLD? instead of ACTIVATE? when
finished.
2)
Use the
FMS
Knobs to edit the course, and press the
ENT
Key.
3)
Use the small
FMS
Knob to select INBOUND or OUTBOUND course direction, and press the
ENT
Key.
4)
Use the small
FMS
Knob to select TIME or DIST length mode, and press the
ENT
Key.
5)
Use the
FMS
Knobs to edit the length, and press the
ENT
Key.
6)
Use the small
FMS
Knob to select RIGHT or LEFT turn direction, and press the
ENT
Key.
7)
Use the
FMS
Knobs to edit the EXPECT FURTHER CLEARANCE Time (EFC TIME), and press the
ENT
Key.
8)
Press the
ENT
Key while ACTIVATE? is highlighted to activate the direct-to with the user-defined hold defined
at the direct-to waypoint. (If the direct-to waypoint is part of the active flight plan, the HOLD is inserted into
the active flight plan. If the direct-to waypoint is not part of the active flight plan, an off-route direct-to hold is
created.)
Exiting a user-defined hold inserted into the active flight plan:
Press the
SUSP
Softkey. The system will provide guidance to follow the holding pattern to the inbound course
and resume automatic waypoint sequencing.
Removing a user-defined hold inserted into the active flight plan:
1)
Press the
FPL
Key.
2)
Push the
FMS
Knob to activate the cursor (not required on the PFD) and turn the large
FMS
Knob to highlight
the HOLD waypoint.
3)
Press the
CLR
Key. A ‘Remove Holding Pattern?’ confirmation window is displayed.
4)
Select OK and press the
ENT
Key. The holding pattern is removed from the active flight plan. Select CANCEL
and press the
ENT
Key to cancel the removal of the holding pattern.
Removing a user-defined hold at an off-route direct-to:
1)
Press a
¯
Key to display the DIRECT TO Window.
2)
Press the
MENU
Key to display the PAGE MENU Window with the cursor on the ‘Cancel Direct-To NAV’ selection.
3)
Press the
ENT
Key. The holding pattern is removed.
Содержание Cessna Caravan G1000
