Garmin Cessna Caravan G1000, Руководство пилота

Страница: 139 / 482

190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
119
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
VOLUME
NAV Radio volume level can be adjusted from 0 to 100% using the VOL/ID Knob. Turning the knob
clockwise increases volume, counterclockwise decreases volume.
When adjusting, the level is displayed in place of the standby frequencies. Volume level indication remains
for two seconds after the change.
Figure 4-21 NAV Volume Levels
NAV Volume Level
remains for two seconds
AUTO-TUNING A NAV FREQUENCY FROM THE MFD
NAV frequencies can be selected and loaded from the following MFD pages:
-
WPT – AIRPORT INFORMATION
-
WPT – VOR INFORMATION
-
NRST – NEAREST AIRPORTS
-
NRST – NEAREST VOR
-
NRST – NEAREST FREQUENCIES
-
NRST – NEAREST AIRSPACES
The MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroute
navigation, the NAV frequency is entered automatically into the NAV standby frequency field. During approach
activation the NAV frequency is entered automatically into the NAV active frequency field.
Frequencies can be automatically loaded into the NAV Frequency Box from pages in the NRST or WPT page
group by highlighting the frequency and pressing the ENT Key.
Auto-tuning a NAV frequency from the WPT and NRST Pages:
1) From any page the NAV frequency can be auto-tuned, activate the cursor by pushing the
FMS
Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired NAV identifier or NAV frequency.
3) On the NEAREST VOR and NEAREST AIRPORTS pages, press the
FREQ
Softkey to place the cursor on the NAV
frequency.
4) Press the ENT Key to load the NAV frequency into the standby field of the selected NAV radio.
5) Press the
Frequency Transfer
Key to transfer the frequency to the NAV Active Frequency Field.
Figure 4-22 NAV Frequency Auto-Tuning from the MFD
Turn the FMS
Knob to scroll
through the list
of frequencies
Press the ENT
Key to load a
highlighted
frequency into
the NAV Standby
Frequency Box