Garland MWE3S Скачать руководство пользователя страница 24

Страница: 24 / 72

SERVICE MANUAL

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION

PART #4526396 (03/30/10)

Page 24

OPERATING PROCEDURES

(continued)

when the button is pressed.

Indicator Lights

The LED lights on the main control indicate the

temperature status of each zone.

Electric�grills

have (4) zones per section , TOP, (platen),

BACK GRILL, MIDDLE GRILL, and FRONT GRILL.

Gas�grills

have (2) zones per section , TOP, (platen),

and GRILL.

RED – The zone(s) is “TOO HOT” (more than 79˚F/43˚C over

set temperature) OR a heat zone failure has occurred.

AMBER – The zone(s) is calling for heat.

GREEN – The zone(s) is at or above set temperature, but

below 79˚F/43˚C over set temperature.

Standby Mode

To enter the standby mode:

1. Press the button. The upper platen will lower, and

the grill will maintain a set temperature of Upper platen

- 425˚ F (218˚C), Grill Surface - 350˚ F (177˚C).

To Exit the standby Mode:

1. Press the GREEN PUSHBUTTON. The upper platen

will raise.

To display the current temperatures:

1. Press the button and repeat for each zone to be

displayed:

1st key press – Front Set Point

2nd key press – Front Actual

3rd key press – Mid Set Point

4th key press – Mid Actual

5th key press – Back Set Point

6th key press – Back Actual

7th key press – Platen Set Point

8th key press – Platen Actual

2. Pressing and holding the button for five (5) seconds

will display all of the current temperatures at once.

Breakfast In Manual mode

1. Select AM mode. Press and hold the button.

2. Select Manual mode. Press and hold the the button.

3. Select a product from the AM product library using the

or arrow buttons.

4. Following McDonalds procedures for the item selected,

load product on the grill.

5. Press the GREEN pushbutton to initiate a cook cycle.

6. Alarm will sound when the cook cycle is complete.

7. Remove product and clean grill to prepare for the next

cook cycle.

Lunch In Manual mode

Note:�

Switching from breakfast to lunch menu items will

take approximately 10 minutes to heat to the appropriate

temperatures.

1. Select PM mode. Press and hold the button.

2. Select Manual mode. Press and hold the button.

3. Select a product from the PM product library using the

or arrow buttons.

4. Following the below lay pattern, load product on the

grill.

5. Press the GREEN pushbutton to initiate a cook cycle.

6. Alarm will sound when the cook cycle is complete

7. Remove product and clean grill to prepare for next

cook cycle.

To�Change�The�Cook�Time�for�a�Menu�Item

1. Select AM or PM mode. Press and hold the button.

2. Select Manual mode. Press and hold the button.

3. Select a product using the or arrow buttons.

4. PRESS the button to display the cook time.

5. Use the and buttons to change the cook time.

6. The control will automatically default back to the

normal operating mode after 3 seconds.

Breakfast In Auto mode

1. Select AM mode. Press and hold the button.

2. Select Auto mode. Press and hold the button. The

control will display “AM / AUTOMATIC”

3. Following McDonalds procedures for the item selected,

load product on the grill.

Содержание MWE3S









































































Результаты поиска

Содержание MWE3S

Отзывы:

Похожие инструкции для MWE3S

Бренды по названию

Популярные бренды

Garland MWE3S, Руководство по обслуживанию

Результаты поиска

Содержание MWE3S

Отзывы:

Похожие инструкции для MWE3S

Бренды по названию

Популярные бренды