![background image](http://html1.mh-extra.com/html/garland/edgesafe-m10gmsbpv2/edgesafe-m10gmsbpv2_user-manual_3638961022.webp)
USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
3
Front Panels
3.1 EdgeSafe IBS Fiber Module
Figure: 10. EdgeSafe module front
1.
“Reset” (RST) button – reset the EdgeSafe Bypass TAP.
2.
Ethernet monitor port #0 – port to connect a transparent network appliance ( 10G port
on the IBS and 1G port on the IBSG).
3.
Ethernet monitor port #1 – port to connect a transparent network appliance ( 10G port
on the IBS and 1G port on the IBSG).
4.
Watchdog timer (WDT) LED
5.
ON - indicate that Passive Bypass circuitry watchdog timer expired,
6.
OFF - indicate that Passive Bypass circuitry watchdog timer disabled,
7.
BLINK – indicate that heartbeat pulse sent to Passive Bypass circuitry.
8.
Bypass mode (BYP) LED – ON -indicate that:
9.
Passive Bypass circuitry is set to Bypass OR
10.
Active Bypass circuitry is set to Bypass or TAP or Linkdrop.
11.
Ethernet network port 0 – port to connect network device (10G port on the IBS10G and
1G port on the IBSG).
12.
Ethernet network port 1 – port to connect network device (10G port on the IBS10G and
1G port on the IBSG).
13.
Push button 1 – EdgeSafe Bypass TAP management button 1
Garland Technology | 716.242.8500 |
22