![background image](http://html1.mh-extra.com/html/garland/edgesafe-m10gmsbpv2/edgesafe-m10gmsbpv2_user-manual_3638961111.webp)
USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
8.4.3.5 M2N
M2N (monitor port to network port link fail) mode support link drop on network port if
correspondent monitor port link gone. This Mode can be set independent for each
monitor port.
8.4.3.6 M2M
M2M (monitor ports two port link) When enabled (on), if one of the monitor ports link
fails it drops the link on the other monitor port. M2M k is disabled (off) by default.
8.4.4 RX/TX errors processing
The IBS can place itself into Bypass or Linkdrop in case it detects RX/TX errors on the Monitor
ports or on the Network ports.
8.4.4.1 Trap
ON/OFF - turn on or off the Trap on case of error detection.
8.4.4.1 Timeout
Set the timeout for sending the RX/TX traps.
Garland Technology | 716.242.8500 |
111