![background image](http://html1.mh-extra.com/html/garland/edgesafe-m10gmsbpv2/edgesafe-m10gmsbpv2_user-manual_3638961133.webp)
USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
1.2 IBSG-LX / IBSGP-LX
1.2.1 Fiber Gigabit Ethernet Technical Specifications - (1000Base-LX) Adapters:
IEEE Standard / Network topology: Fiber Gigabit Ethernet, 1000Base-LX (1310nM)
Data Transfer Rate:
2Gbit/s in full duplex mode per port
Network ports Cables and
Operating distance:
Single mode fiber:
5000m maximum at 9 um
**
Insertion Loss ( Passive: Normal
Mode)
Typical: 1.2 dB Maximum: 1.6dB
Insertion Loss ( Passive: Bypass
Mode)
Typical: 1.2 dB Maximum: 1.6dB
Voltage:
12V +/-5%
Size:
173.3mm x 164.9mm x 20 mm ( 6.822” x 6.73” x
0.787”)
Operating Humidity:
0%–90%, non-condensing
Operating Temperature:
0°C – 40°C (32°F - 104°F)
Storage Temperature:
-20°C–65°C (-4°F–149°F)
EMC Certifications:
Class B FCC / CE / VCCI /
Safety:
UL
MTBF*:
> 150,000 hours
1.2.2 LED and Connector Specifications
LEDs:
Network / Monitor ports:
Link LED – (Green) On Link partner is Detected.
Activity LED – (Yellow) Blinks on activity.
Power - Green power is on
Normal – Green, Switch in Normal mode.
SysOK – Yellow when Sys is OK,
WDT – Blink Yellow when WDT is activated Light
Yellow WDT time out
Off: WDT is disabled
Bypass - Red when bypass, off on Normal Alarm –
Red on system alarm
Connectors:
Network: 2 LC Duplex Monitor: 2 SFP
Management:
RJ-11 serial port
RJ-45 Ethernet // optional for future use
Garland Technology | 716.242.8500 |
133