![background image](http://html1.mh-extra.com/html/garland/edgesafe-m10gmsbpv2/edgesafe-m10gmsbpv2_user-manual_3638961098.webp)
USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
Variable name
Variablecode
(X=)
Type
Attributes
Value
Description
ibsSysTacacsKey
3.29
OCTET STRING
(SIZE(8..127))
read-write
Set the Tacacs secret key. Set only
variable, read will return zero length
string.
ibsSysTacacsState
3.30
INTEGER
read-write
off(1),
on_clear(2),
on_encrypted
(2)
Show/set TACACS state.
ibsSysTacacsServerIp
3.31
IpAddress
read-write
Show/set the IP address of the TACACS
server.
ibsSysTelnetState
3.32
INTEGER
read-write
off(1),
on(2)
Show/set Telnet state.
ibsSysSetMgmtPermitIP
3.35
OCTET STRING
(SIZE(9..2550))
read-write
Add the management port permitted
network IP address. String consists of IP and
netmask separated by semicolon
(192.168.0.0/24;193.151.0.0/22)
ibsSysRemoveMgmtPermi
tI P
3.36
OCTET STRING
(SIZE(9..2550))
read-write
Remove one or all management port
permitted network IP. String consists of IP
address and netmask address separated by
semicolon (192.168.0.0/24;193.151.0.0/22 |
all_permitted_ip)
ibsSysShowMgmtPermitIP
3.37
OCTET STRING
(SIZE(9..2550))
read-write
Display management port permitted
network IP. String consists of IP and
netmask separated by semicolon
(192.168.0.0/24;193.151.0.0/22)
ibsSysTacacsMultiUsers
3.38
INTEGER
read-write
off(1),
on(2)
Show/set TACACS multi users state.
ibsSysSetTrapAccount
3.39
OCTET STRING
(SIZE(9..2550))
read-write
Add the SNMP monitor server trap account.
String consists of IP addresses, community
name and password separated by
semicolon.
(192.168.0.0/community1/gt82d7yfr;
193.151.0.0/community2/)
Take effect after setting ibsSnmpApply.
ibsSysRemoveTrapAccount
3.40
OCTET STRING
(SIZE(9..2550))
read-write
Remove one or all SNMP monitor server
trap accounts. String consists of IP
addresses separated by semicolon.
(192.168.0.0;193.151.0.0 |
all_trap_accounts)
Take effect after setting ibsSnmpApply.
ibsSysShowTrapAccount
3.41
OCTET STRING
(SIZE(9..2550))
read-only
"Display SNMP monitor server trap accounts.
String consists of IP addresses and
community name and password separated
by semicolon.
(192.168.0.0/community1/**********;
193.151.0.0/community2/not set)
ibsSysPowerOff
3.42
INTEGER
read-write
Poweroff(1)
Power off the IBS module.Set only
command, read will return zero.
ibsSysPwOffState
3.47
INTEGER
read-write
bypass (2)
Disconnect (4)
Device power off state: bypass or disconnect
ibsSysRxTxErrTrapTimeout
3.49
read-write
off(1),
on(2)
Enable generating trap on rx/tx error
ibsSysRxTxErrMonAction
3.50
read-write
Allow to choose network ports state
when errors detected on monitor port
ibsSysRxTxErrNetAction
3.51
read-write
Allow to choose network ports state when
errors detected on network ports
ibsSysRxTxErrRateThreshold
3.52
read-write
Network ports state that was configured
will be activated, when error rate threshold
will be reached (err/sec). Error rate threshold
value should be set more than zero
ibsConf2pl
4.1
INTEGER
read-write
enable (1),
disable (2)
Show/Set two-port link mode
ibsConfHbExpState
4.2
INTEGER
read-write
bypass(2),
tap(3),
linkdrop(4)
Show/Set heartbeat expiration mode.
Garland Technology | 716.242.8500 |
98