![background image](http://html1.mh-extra.com/html/garland/edgesafe-m10gmsbpv2/edgesafe-m10gmsbpv2_user-manual_3638961003.webp)
USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
Revision Date
Change description
2.9
24-Nov-13 Update for FW 0.3.0.5
Added commands
(CLI, WEB SNMP):
show_rx_tx_err_mode
Set_rx_tx_err_mode
Added to WEB, SNMP interface FAN status
Added support for reporting good link is admin down due to 2PL/M2M
Added support for reporting manual mode device change status events in log file
Adding Copper version
3.0
Adding support for advanced_link and SSH state
Update
show_dev_state
and
show_dev_alert
Added copper module IBSG-T
3.1
FW 3.1.1 - Add support for TACACS multi users, TACACS fallback.
Add support for Internal vlan change
Add support for M2M
3.2
FW 3.1.5 - Add support for Multi SNMP servers
Add support for multi NTP servers
3.4
FW 3.1.7 - Add support for authorization read-only and read-write user
Add support for for serial port
Add support for Control and Info sessions for CLI and WEB users
Add support for shell prompt show the user@hostname and will include in
additional the permission level
Add support for changing ssl certificate for the web UI
3.5
FW 3.2.0 - Add support for Selective Bypass Filters (VLAN/MPLS/IP)
Added support for management port vlan
Add support for cli tab to complete the command
Notes: Several new features supported only with new HW devices (EdgeSafe hardware version 0.3.0.0
and up).
Garland Technology | 716.242.8500 |
3