USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
10 Appendixes
10.1 Key Features
●
Self generating heartbeat pulses – No driver or management port is required to
generate pulses.
●
Sets to Bypass when it detects in-line system failure.
●
Sets to Bypass when it detects in-line system link failure
●
Sets to Bypass when it detects in-line software application system hang.
●
Sets to Bypass on Power failure.
●
Sets to Normal when it detects in-line system recovery.
●
Double Safe Bypass architecture with two routing circuitries
●
Two on Board WatchDog Timer (WDT) Controllers
●
Software programmable time out interval
●
Support Two ports link feature - if one of the network ports link fails it will drop the link
on the other network port as well
●
Independent Bypass / Normal / Tap /Linkdrop operation in every module
●
Supports up to four modules in a chassis
●
Supports 6 different TAP mode of operation
●
Simple CLI configuration management via serial port
●
HTTP/HTTPS management interface via network management port
●
Telnet management interface via network management port
●
SSH management interface via network management port
●
Supports SNMP version 1, 2c, 3 (SHA, AES)
●
Support for SNMP multi trap destinations
●
Supports remote log
●
Supports
●
Support for multi users.
●
Supports NTP
●
Supports time zone
●
Supports remote save/restore backup configuration
●
Two redundant power supplies
●
Support power supply monitoring
●
Optional -48V DC power supplies
IBS10G-SR - Supports Short Range Fiber 10 Gigabit Ethernet (Base-SR).
IBS10G-LR - Supports Long Range Fiber 10 Gigabit Ethernet (Base-LR).
IBSG-SX - Supports Short Range Fiber Gigabit Ethernet (1000Base-SX).
IBSG-LX - Supports Long Range Fiber Gigabit Ethernet (1000Base-LX).
IBSG-ZX - Supports Long Range Fiber Gigabit Ethernet (1000Base-ZX).
Garland Technology | 716.242.8500 |
128
