![background image](http://html1.mh-extra.com/html/garland/edgelens-int10g8sr56/edgelens-int10g8sr56_user-manual_3627550065.webp)
User Guide
EdgeLens | INT10G8XX56 | 4.22.1
Config Map
Config maps are unidirectional connections between ingress port(s) to egress port(s) and/or a load
balancing group.
1. Select Configuration Maps.
The Packet Broker Configurations panel will be displayed.
2. Select Create Config Map.
The Create Config Map panel will be displayed. Any previously created load balancing groups
or filter templates will be displayed along with the new options. Any port shaded gray can be
used for a config map, any port shaded black may not be used.
3. Select the name pencil to apply a name, optional. If no name is entered the system will
automatically apply a name to the config maps as follows, map, map(1), map(2) etc.
4. Enter the desired name.
5. Select the Check to apply.
6. Select the No to disregard.
7. Select the Description pencil to apply a description, optional.
8. Enter the desired description.
9. Select the Check to apply.
10. Select the No to disregard.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
65