Garland EdgeLens INT10G8SR56 Скачать руководство пользователя страница 40

Страница: 40 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

maintenance activities.

Figure 20 Load Balance Tap Mode (Force Bypass)

4. Select the Fail Mode.

Open

If selected, power is lost to the unit. The traffic will switch between the

network ports.

Closed

If selected, power is lost to the unit. The traffic will go down.

5. LFP

If enabled and link is lost on one of the network ports. The TX will be disabled on

the other network port. The RX for both network ports remain on.

Figure 21 Load Balance Tap Mode (LFP)

6. Reverse Bypass

If enabled and the inline appliance

port(s) fail, loss of link

or heartbeats, defined

by the bypass threshold value, 1-4. The TX will be disabled on both of the
network ports. The RX for both network ports remain on.

Figure 22 Load Balance Tap Mode (Reverse Bypass, Bypass Threshold=2)

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Содержание EdgeLens INT10G8SR56













































































Результаты поиска

Содержание EdgeLens INT10G8SR56

Отзывы:

Похожие инструкции для EdgeLens INT10G8SR56

Бренды по названию

Популярные бренды

Garland EdgeLens INT10G8SR56, Руководство пользователя

Результаты поиска

Содержание EdgeLens INT10G8SR56

Отзывы:

Похожие инструкции для EdgeLens INT10G8SR56

Бренды по названию

Популярные бренды