13
Command 43
Periodic Test Call
CTC-1052 can be programmed to make test
calls periodically from (00) (no test call) to
every (1) - (7) or 30 days:
Function Selection
Result
(0)
OFF
(1) - (7)
1 - 7 DAYS
(8)
30 DAYS
Factory Default is set as (
0
),
OFF
.
<NOTE>
Whenever programming mode is
accessed, CTC-1052 will reset the
Periodic Test Call timer.
Periodic Test Call will only function with
telephone numbers assigned to
Digital
or
SMS
reporting method in
Command
20-24.
Command 44
Mobility Timer
This function monitors user movement around
the premises and sends an inactivity report to
the Monitoring Center if the user fails to reset
the inactivity timer.
This will disable or enable the Inactivity
Timer with selectable count down periods.
Options are:
Function Selection
Result
(00)
DISABLE
(01)
1HR
(02)
2HR
..........
.........
(36)
36HR
Factory Default is set as (
00
),
DISABLE
.
<NOTE>
The Mobility Timer counting down can
be reset by:
1. Pressing the
Green Reset Button
on CTC-1052, or,
2. Movement
detected
by
PIR
Detector
3. Only workable by entering 2 digits.
When Mobility Timer expires and no
reset signal is received, CTC-1052
starts to emit one long beep every 5
minutes to alert the user. (You can
enable or disable long beep sound, see
Command 78
for details).After 30
minutes, if reset signal is not received,
a mobility alarm reporting will be made.
The reporting method for mobility alarm
is the same as the emergency alarm.
The report will be sent based on your
reporting methods without guard time
waiting.
When (
00
) is selected, no code is sent
to Monitoring Center.
When CTC-1052 is in idle mode, press
and hold the
Green Reset Button
for
16 seconds, until you hear a long beep.
Release the button and the Mobility
function will be disabled.
Содержание CTC-1052
Страница 1: ...E1 August 25 2017...
