Maintenance
46
operation manual VCpro 600
7
Maintenance
7.1
Service
TECHNICAL SERVICE
►
The device must be regular serviced and inspected in case substances
are used that reduce the lifetime of wetted materials.
See Chapter 3.4 Parts in contact with internal gas.
►
The operator is responsible for a sevice and ispection schedule to
ensure safe operartion.
Cleaning
Depending on contamination, components in contact with media (connections, valves, sen-
sors) must be cleaned at regular intervals with a suitable solvent (e.g. acetone).
7.2
Repair
ATTENTION
►
Repair is only done if there is a completely filled-out damage report.
►
The specification of the contamination or the complete cleaning is a
legal component of the contract.
Transfer a defective device to the manufacturer or an authorized workshop for repair.
Depending on the applications, the user must create a new service and maintenance plan.
Damage report
The damage report form is available for download from our website
on the "Service" menu
"Damage reports."
If you do not have access to the Internet, you can request the form from us
Tel.: +49 3677 604 0.
WARNING
►
Incompletely or incorrectly filled-out damage reports can endanger the
service personnel!
►
Make complete statements in the damage report, especially with regard
to a possible contamination of the components in contact with media.
7.3
Disposal
ATTENTION
►
Incorrect disposal can cause environmental damage.
►
Disposal must be done according to the legal regulations
– according to directive 2012/19/EU.
►
Contaminated devices must be decontaminated according to the legal
regulations.