Gardner Denver Welch VCpro 600 Series Скачать руководство пользователя

Страница: 36 / 53

Operation

operation manual VCpro 600

Display log files

1. Select the "System settings" menu option.

2. Select the "Log files" menu option.

3. Select the "Log files" menu option.

4. Select a log file.

5. Confirm your entry.

Delete log files

1. Select the "System settings" menu option.

2. Select the "Log files" menu option.

3. Select the "Display log files" menu option.

4. Press the rotary encoder for 2 s.

5. You will see "Do you really want to delete log files?"

6. Confirm your selection with "Yes."

6.3.3

Reset to factory settings

1. Select the "System settings" menu option.

2. Select the "Reset to factory settings" menu option.

3. Confirm your selection with "Yes."

NOTE

After selecting "Yes" (with check mark), the language is set back to the factory setting

(English). All values are also reset to the factory settings.

6.4

"PC-Control 601" PC software (Option)

The

PC-Control 601

handles remote control of the vacuum controller VCpro 600 series.

Generally, the PC software offers all control possibilities, just like on the end device. In addi-
tion, the following operations are possible with the PC software:



Firmware updates



Transfer time and date from the PC



Factory settings & factory calibration (not public)

6.4.1

Installation

NOTE

The PC software can be downloaded as installer package. The file "setup.exe" installs

the PC software and the required CVI Runtime Environment.

1. Select the "

PC-Control 601"

PC software. It is available as freeware from

www.gardnerdenver.com/welch

on the "Service" menu



download area.

2. Call up the PC software with "VC601_

XXX

.exe" in the installation directory.

NOTE

XXX

describes the sequential version number of the PC software.

Содержание Welch VCpro 600 Series






















































Результаты поиска

Содержание Welch VCpro 600 Series

Отзывы:

Похожие инструкции для Welch VCpro 600 Series

Бренды по названию

Популярные бренды

Gardner Denver Welch VCpro 600 Series, Руководство по эксплуатации

Результаты поиска

Содержание Welch VCpro 600 Series

Отзывы:

Похожие инструкции для Welch VCpro 600 Series

Бренды по названию

Популярные бренды