Gardner Denver RBS 15, Руководство по обслуживанию и список запасных частей

Страница: 34 / 62

5.5 Assembling of the bearings
Clean and oil the matching surfaces of the bearings, of the shafts and of the bearing housings
WARNING: Use the hoisting devices suitable to the weight of the bearings (table 7.1).
WARNING: Do not use the hammer to introduce the bearings
5.5.1 .1 Bearing Pos. 31
Threated rod Thrust nut
Pipe
Thrust disk
Bearing 31
Fig. 37
WARNING: The device must be fixed to the end of the drive shaft as indicated in figure 37
The thrust disk must have the dimensions indicated in the figure 38 below
Fig. 38
WARNING: Respect the dimensions Di and H scrupulously
Size M L
15-25 10 83
35-45-46 10 126
55-65-66 12 155
75-85-86 16 164
95-105-106 16 204
115-125-126 20 202
135-145-155 20 237
165-175 24 283
205-225 24 288
Size De Di Da H
15-25 50 40 25 1,4
35-45-46 80 65 40 1,8
55-65-66 110 90 50 1,9
75-85-86 130 105 60 2,1
95-105-106 150 125 70 2,1
115-125-126 170 80 80 0
135-145-155 200 95 95 0
165-175 200 110 110 0
205-225 230 130 130 0