Gardner Denver RBS 15, Руководство по обслуживанию и список запасных частей

Страница: 26 / 62

WARNING: Use the hoisting devices suitable to the weight of the oil sump (table 7.1).
Fix the oil sump with the screws Pos. 90
5.2.2 Sizes from 35 to 106
Insert the sealing spacers Pos. 25 completed with the sealing piston rings as indicated in the paragraph 5.4.
Insert the oil splash disks 23A and 23C onto the sealing spacers by means of a pipe as indicated in figure 22.
Oil splash disk 23A
Pipe
Fig. 22
Insert the spring Pos. 64 onto the drive shaft
Mount the bearings 31 and 32 as indicated in the paragraph 5.5.1 e 5.5.2
Lock the bearing 32 by means the disk 17 and the screw 27B
Lock the external ring of the bearing 31 by means of the screw Pos. 407
Insert the lubricating disk 16A onto the drive shaft in contact with the bearing pos. 31
Insert the shaft sleeve Pos. 37 as indicated in figure 23
Pipe
Locking screw 407
Shaft sleeve 37 Screw 27 B
Disk 16A Disk 17
Bearing 31
Spring 64
Fig. 23
Mount the drive side oil sump 12A with a new gasket 50
Size De Di
35-45-46 58 48
55-65-66 73 63
75-85-86 83 73
95-105-106 100 88
Size De Di L
35-45-46 50 40 84
55-65-66 60 50 113
75-85-86 70 60 113
95-105-106 80 70 145