Gardner Denver RBS 15, Руководство по обслуживанию и список запасных частей

Страница: 24 / 62

> 300 mm
5 ASSEMBLING OF THE BLOWER
5.1 Preparation
Before the reassembly of the blower clean all the elements and oil the elements that are in contact with each
other.
Place the cover 5B on suitable wooden supports in order to have a free space below of almost 300 mm as
indicated in figure 18
Place the casing 1 onto the cover 5B using suitable ropes passing around the nozzles as indicated in figure
18, with the threaded holes F of the flanges downwards, to position the casing use the reference pins of the
cover and the reference marks carried out during the disassembly of the blower
WARNING: Use the hoisting devices suitable to the weight of the elements (table 7.1)
Casing 1
Holes F
Cover 5B
Fig. 18
Slide the rotors in the casing with the tapered ends downwards, place the drive rotor following the marks
carried out during the disassembly of the blower
WARNING: Use the hoisting devices suitable to the weight of the rotors (table 7.1), fixed to the
threaded end as indicated in figure 19
WARNING: Do not damage the tapered end of the shafts.
Hook
Tapered shaft end
Fig. 19