Gardner Denver RBS 15, Руководство по обслуживанию и список запасных частей

Страница: 17 / 62

3.3.2 Disassembling the gear side, sizes from 35 to 225
Unscrew slightly the locking nuts 26 and move them 1 or 2 mm away from the gear wheels
WARNING: DO NOT REMOVE THE LOCKING NUTS 26, because by releasing the gear wheels
they may be cast out.
Screw the injector or oil pump to the end of the shaft using the suitable nipples, for the devices see table 7.5,
for the connections size see table 7.6.
Oil injector
Nut 26 Nut 26
Wheel 11B Wheel 11A
1
– 2 mm
Safety screw
Spacer 22 Washer
Fig. 12
Inject oil until the gear wheel is released.
WARNING: The pressure of the oil during disassembly may reach 2000 bar and the incorrect
assembly of the injector or pump may cause serious physical damage owing to the jets of oil
under pressure.
Remove the injector or the oil pump and the locking nuts 26
Extract the gear wheels 11A and 11B and mark their position
WARNING: Use the hoisting devices suitable to the weight of gear wheel (table 7.1), starting
from size 165 the wheels have threaded holes to facilitate their hoisting
Extract the spacers 22 and the adjusting shims and mark their position for following assembly of the blower