Gardner Denver L160 110A V2, Руководство пользователя

Страница: 26 / 72

4 Transport and installation
26 / 72 America January 2017
4 TRANSPORT AND INSTAL-
LATION
4.1 Transport
Delivery
The compressor is bolted down to a shipping
pallet and covered in plastic sheet packaging.
The center of gravity and lifting points are marked
on the packaging.
Receiving
When received, check for shipping damage.
1 Check the delivery for visible damage.
2 Use the packing list to check the delivery for
completeness.
3 Immediately inform the freight forwarder,
insurance, and Gardner Denver of any missing
parts or damage.
Weight
Dependent on type, the compressor weighs up to
4,700 kg / 10362 lbs (gross). The weight is stated
on the nameplate and is visible from the outside.
Transport
DANGER
Danger to life
Danger to life from tipping or falling
parts.
➯
A suitable forklift with sufficiently
long forks must be used to transport
the compressor.
➯
Use forks only at the labeled lifting
points.
➯
The compressor, even in its packed
state, may not be transported by
crane.
➯
During transport, no persons may
be present in the hazard area.
In particular, do not reach in or
allow the feet to pass beneath the
suspended compressor.
NOTICE
Property damage
Do not lift up or lash the compressor system by
its enclosure.
Note fork length of forklift.
Transporting the compressor
Fig. 4-1: Lifting points
2
1
[1]
Wire pin
[2]
Hinge pin
1
Remove bolts from the transport pallet.
2
Pull wire pin
3
Remove doors
4
Lift the compressor off of the transport pallet.
5
Transport the compressor to the destination
area.
6
Align the compressor and place it down.
Weights
The following values are approximate. They apply
to the screw compressor unit, including oil charge: