5. Extended functions
18
5.7 Replacing the GD Pilot (SETUP-
CODE)
Once the new GD Pilot has been fitted in your
compressor, switch the main switch back on.
The following now appears on the display:
*** GARDNER DENVER ***
SETUP-CODE 1: 0000
You will find the setup codes on a sticker (see Fig. 3) in
the compressor switch panel (see Fig. 4). You can now
use the
or
keys to enter the first setup code.
Please confirm your entry using the
key. The whole
process now has to be repeated twice for codes 2 and
3.
If you have entered a code incorrectly, the indication
immediately jumps back to code 1. You then have to re-
enter all three codes.
If you have correctly entered the codes, the machine
will have automatically been switched to its delivery
status.
The language has now been reset to English. If you
need a different language, please set this as described
in section 2.1.
You now have to set the maximum line pressure and
the target pressure. You will find the precise description
for this process in the Default settings section.
You then have to repeat the individual programming for
the inputs and outputs. Consult your compressor's
circuit diagram for this. It contains information about
how the inputs and outputs were programmed.
The Menu section
[Option. inputs/outputs]
contains an accurate description of how to program
inputs and outputs.
Fig. 3 Setup code sticker
Fig. 4 Compressor with open switch panel
1 Sticker
