DE
FR
IT
ES
15
14
DE
EN
FR
IT
ES
DE
EN
FR
IT
ES
www.hoffmann-group.com
65 7750
U
U
l
2
l
1
l
j
Adjustment
Any GARANT torque wrench must be
checked and readjusted regularly. We
recommend this after approximately
every 5000 operations, but in any case at
the latest every twelve months.
Should no suitable tester with click point
recognition be available, then send your
GARANT torque wrench to the Hoffmann
Group, where it will be checked and
adjusted
Torque wrenches with plug-and-
socket connection
For the GARANT torque wrench adjust-
ment, the following tools are used:
When using insert tools with other ef-
fective length, the torque to be adjusted
(MDE) must be calculated using the
following formula:
MDE = torque to be set
MDV = prescribed torque
l
j
= Standard length of adjustment using
an adjusting tool
l
1
= Effective length of the torque
wrench
l
2
= Gauge dimensions of the
adjusting tool
l
w
= Gauge dimension of the insert tool
MDE =
(l
1
+ l
2
) × MDV
l
1
+ l
w
GARANT
No.
l
1
mm
Adjusted with
Hoffmann No.
l
2
mm
657750 5
120
657600 1-1/4
17,5
657750 14
132
657600 1-1/4
17,5
657750 25
170
657600 1-1/4
17,5
657750 60
280
657600 1-3/8
25,0
U
U
l
w
Important notes
The following notes must be observed as
a matter of principle. This is the only way
to ensure problem-free use of this precisi-
on tool over longer periods of time.
After use we recommend to reset the
wrench to the lowest value (mainly if
there’s a torque analyser in use).
GARANT torque wrenches are only inten-
ded for tightening screw connections.
Under no circumstances must they be
used as levers, clamping or hammering
tools!
Accessories
A comprehensive range of quality acces-
sories is available for all GARANT torque
wrenches.
