G&D DP1.2-MUX3-ATC, Руководство пользователя

Страница: 174 / 188

Controlling the KVM switch via XML
75 · G&D DP1.2-MUX3-ATC
Configuring the device's accesses for XML control
Use the web application Config Panel to define the »Remote Control« accesses and
their settings.
How to set up a new access or edit an existing access:
1. Klicken Sie im Menü auf KVM-Switches .
2. Click on the device you want to configure and then click on Configuration .
3. Click on the tab Network .
4. Go to Remote control .
5. To create a new access, click on Add .
To edit an existing access, click on Edit
.
6. Enter or edit the following values:
7. Click on OK to save your settings and to close the window.
IMPORTANT: Controlling the device via XML is only possible via these accesses.
Access: Select the protocol (
TCP
) or (
UPD
) to process XML communi-
cation.
Port: Enter the port to process XML communication.
Ports 80, 443 and 27996 are used for other services. They are
not available for XML control.
Status: Select if access is
Enabled
or
Disabled
.
Protocol: Select if you want to use the XML or the Extron protocol.
Encryption: The following types of encryption are supported:

Unencrypted: Select the option None to transmit data without
encryption (default).

Password encryption:
Select the option
Password: CBC-3DES
to
transmit login passwords with encryption.

Transport encryption: Select the option CBC-3DES to encrypt
the entire connection.
Encryption key: After enabling an encryption type, enter the key (192 bit) in
the form of 48 hex digits.
Initialization
vector:
Enabling the encryption type CBC-3DES additionally requires
an initialization vector. Enter the initialization vector (64 bit)
in the form of 16 hex digits.