G&D DP1.2-MUX3-ATC, Руководство пользователя

Страница: 105 / 188

Installation
G&D DP1.2-MUX3-ATC · 6
English
3. Before installing the KVM switch, decide which button on the front of the device
you want to assign to which computer.
Connecting the workstation devices
PS/2 Keyb.:
Connect the connection cable of the
PS/2 keyboard.
If required, use the optional adapter
MD6M-
2xMD6F
(see figure on the right) to also connect the
mouse connection cable to the KVM switch.
USB K/M: Connect the connection cable of the USB
keyboard and/or USB mouse.
Speaker:
Connect the speakers to this interface to output the audio signals from the
active computer.
Monitor: Connect the DisplayPort cable of the monitor to this interface.
Digital Audio Out: Connect the digital audio device to this interface.
USB 3.0:
If you want to make USB devices available to the connected computers,
connect these devices to these interfaces on the
front panel
.
Figure 2: Interfaces for connecting the workstation devices
NOTE: The device variants DP1.2-MUX3-ATC-R and DP1.2-MUX3-ATC-MC2-R are
additionally equipped with a RS232 Device interface.
Connect the serial terminal device of the console to this interface.
NOTE: If mouse and keyboard of the workstation are PS/2 devices, connect them to
the
PS/2 K/M
interface. If they are USB devices, connect them to the
USB K/M
interfaces.
NOTE: For multichannel devices, the interfaces
Monitor x
are placed above this
interface.
Connect the DisplayPort cables of the other monitors to these interfaces.
DP CPU 2 DP CPU 1 RS232
Network A
Network B
USB 3.0 Line In PS/2 K/M USB K/M USB 3.0 Line In PS/2 K/M USB K/M USB 3.0 Line In PS/2 K/M USB K/M Speaker
PS/2 K/M USB K/M
CPU In 2
DP Monitor
CPU In 1 CPU In 3
Dig. Audio Out
Mouse cable
Keyboard cable
PS/2 (switch)