Installation – Gamry Instrument Manager
33
Figure 4-3
Framework with Three Potentiostats and One Running Test
The Interface 1000 (
IFC 01004
) in this system is shown with a green indicator because it is installed and ready
to run. The Reference 600 labeled
My Ref600
has a yellow indicator because it is recording the EIS spectrum
shown on the screen. The Reference 600 labeled
Jims Ref600
has a white indicator, showing it is plugged in
but cannot be used. This is an indication of obsolete firmware.
Though no Reference 3000 was used in this example, its status indicator behaves in the same manner
described above.
Gamry Instrument Manager
Use Gamry’s Instrument Manager dialog box to make changes to the configuration of your Reference 3000
system. Get access to this dialog box via the
Options
menu in the Gamry Framework.
Use the Instrument Manager to:
Rename potentiostats
Delete potentiostats that are not currently connected to the computer
Select the order in which potentiostats appear in menus
Authorize potentiostat use with applications packages
Update firmware within potentiostats
Run the Instrument Manger by selecting
Options>Instrument Manager...
on the Framework Menu.
Figure 4-4shows an
Instrument Manager
dialog box for a two-potentiostat Framework session with a
Reference 600+ and a Reference 3000.
