Chapter 4: Hardware Installation
4-8
1)
Ensure that your LPI1010 is plugged into the Interface 1010 instrument, and the LPI1010 has its power
cable connected to the back of the Interface 1010
2)
Power on your Interface 1010 and ensure that its USB port is connected to your computer
3)
Start the Gamry Instrument Manager from either the Start menu or from within the Framework™
software by selecting
Option/Instrument Manager…
on the Framework Menu. From the Start menu
navigate to the Gamry program group and then select the Gamry Instrument Manager from the list
Figure 4-9
Gamry Instrument Manager window
4)
The left pane of the Instrument Manager shows a complete list of applied potentiostats. The status
indicator should turn green after a potentiostat fully powered up.
5)
Click on the potentiostat that is connected to the LPI1010. Detailed information about the potentiostat is
then shown in the right window. Check if any software updates are required, see also chapter
Firmware
Update
for more information.
6)
If the LPI1010 is correctly connected to the selected potentiostat and powered, the device is listed with
the
Model
name
Load/Power Supply Interface 1010
.
7)
Press the
Configure
button to open the LPI Configuration Entry dialog box as shown in Figure 4-10.
The setup configuration of the electronic load or programmable power supply
MUST
be entered
in Framework before the first use of your LPI1010 system.
Содержание LPI1010
