Gamry Instruments LPI1010, Руководство оператора

Страница: 26 / 69

Chapter 4: Hardware Installation
4-6
Figure 4-6
LPI Voltage Sense Cables
Connect both supplied LPI Voltage Sense Cables to the matching connectors of the LPI as shown in Figure 4-7. The
red cable is for the positive (+) contact and the black cable is for the negative (-) contact.
Figure 4-7
LPI Voltage Sense Cables connected to the LPI Cable End Module
The other end of the LPI Voltage Sense Cable is connected to the DUT.
Connect Cell Cables to DUT
After installing the LPI1010 to the potentiostat and all other cables to the LPI1010 and the electronic load or power
supply, the DUT can be connected to the setup as shown in Figure 4-8.