Gamry Instruments EIS Box Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 52

Gamry Instruments EIS Box Скачать руководство пользователя страница 3

3

If You Have Problems

Please visit our service and support page at www.gamry.com/service-support/. This page contains information
on installation, software updates, and training. It also contains links to the latest available documentation. If you
are unable to locate the information you need from our website, you can contact us via email using the link
provided on our website. Alternatively, you can contact us one of the following ways:

Internet

www.gamry.com/service-support/

Telephone

(215) 682-9330 9:00 AM

–

5:00 PM, US Eastern Standard Time

(877) 367-4267, Toll Free US and Canada Only

Please have your instrument model and serial numbers available, as well as any applicable software and
firmware revisions.

If you have problems in installation or use of a system containing an EIS Box, please try to call from a phone
next to your computer, where you can type and read the screen while talking to us.

We will be happy to provide a reasonable level of free support for registered users of the EIS Box instrument.
Reasonable support includes telephone assistance covering the normal installation, use, and simple
customization of a computerized system containing an EIS Box instrument connected to a Windows

®

-

compatible computer.

A service contract that extends both the hardware warranty and software update period is available at an
additional charge. Software updates

do not

include software enhancements offered to our customers at

additional cost.

Enhancements to the EIS Box instrument

and Gamry’s standard applications software th

at require significant

engineering time on our part can be performed on a contract basis. Contact us with your requirements.

«
1
2
3
4
5
...
»

Содержание EIS Box





















































Отзывы:

Нет отзывов